The original question is whether it is possible to have JNI configurations
in a mixed topology (fcaw.conf configuration that handles both fabric and
point-to-point). The idea is to have a disk subsystem attach to a server
point-to-point AND a tape-area-network is attached via fabric. Many of you
thought this is not possible and some have thoughts. An actual check with
JNI confirms that indeed it is possible with a suggestion that the EzFibre
utility is the best way to do this...
> We are planning to utilize JNI (FC64-1063) SBus FC adapters to connect a
> HDS FC Array Storage (point to point) and a Tape Area Network (fabric via
> a Brocade Switch). I'd like to know if anyone in the list has a similar
> setup and what JNI drivers should I use? As described, there will be
> separate JNI cards for the point to point connection to the HDS disk
> storage and separate JNI cards for the Tape connection (via fabric on a
> Any experiences, tips and warnings will be apreciated.
> NELSON T. CAPARROSO
> Decision Consultants, Inc.
> * email@example.com
> * (248) 362-7799
> Ameritech Advertising Services, An SBC Company
> Information Technology - Tech Support
> * firstname.lastname@example.org
sunmanagers mailing list
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:14:24 CDT