Hi Managers,
judging from the number of replies, this looks like a question that everybody on
the list knew but me.
The solution is to: setenv auto-boot? false before doing the reset all to
prevent a reboot.
Then probe-scsi should work. Be sure to set auto-boot back to true if you want
that behavior.
Thanks to all (too many to list)
The original questiion was:
> Hi Managers,
>
> We have some E-450's that we have terminals on and
> no monitors. When I do a
> shutdown and attempt to do a probe-scsi I get a
> message saying that this may
> fail if a halt or L1-A was used to stop the machine.
>
>
> It suggestes doing a "reset all". This reboots the
> machine and I still can't do
> a probe-scsi. If I don't do a "reset all" and try a
> probe-scsi it just prints
> "bus error" to the screen over and over.
>
> I get the same thing if I use init 0 or shutdown.
>
> Is there any way around this? I need to be able to
> do a probe-scsi when adding
> scsi peropherals.
>
>
> Thanks!
>
> Rick Fincher
> rnf@tbird.com
S
U BEFORE POSTING please READ the FAQ located at
N ftp://ftp.cs.toronto.edu/pub/jdd/sun-managers/faq
. and the list POLICY statement located at
M ftp://ftp.cs.toronto.edu/pub/jdd/sun-managers/policy
A To submit questions/summaries to this list send your email message to:
N sun-managers@sunmanagers.ececs.uc.edu
A To unsubscribe from this list please send an email message to:
G majordomo@sunmanagers.ececs.uc.edu
E and in the BODY type:
R unsubscribe sun-managers
S Or
. unsubscribe sun-managers original@subscription.address
L To view an archive of this list please visit:
I http://www.latech.edu/sunman.html
S
T
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:14:19 CDT