Subject: Stop A Summary REVISED
Just to clarify:
The question I asked before about using telnet was just for a one-time shot.
This is an Sun E250 and I am setting up the RSC software (remote console). I had
only wanted to get to the ok prompt to type the following commands to redirect
the console to the remote console:
diag-output- to rsc
setenv input-dev rsc
setenv output-device rsc
We had difficulty reaching anyone at the remote location so hence my question. I
am aware that there are ways to telnet using other equipment etc, because we are
going to use RSC it didn't warrant any additional equipment. I will wait until
there is a body to actually make the changes on location.
I will also check and see if any of the commands above can be changed with the
eeprom command.
Thanks again for all of the responses.
Jill
All,
Could not find anything in the archives/FAQs concering this specific problem.
I am on a PC with a PC keyboard. I have telneted into a Sun server at a remote
site, SU'd to root. I want to get to the ok prompt.
I am using the Exceed telnet software.
I have tried the following:
scroll lock on/F1/a, crtl break, and alt break to no avail.
Can someone please inform me what keystrokes I need to perform to emulate a stop
a for this particular situation?
Thanks.
Jill
S
U BEFORE POSTING please READ the FAQ located at
N ftp://ftp.cs.toronto.edu/pub/jdd/sun-managers/faq
. and the list POLICY statement located at
M ftp://ftp.cs.toronto.edu/pub/jdd/sun-managers/policy
A To submit questions/summaries to this list send your email message to:
N sun-managers@ececs.uc.edu
A To unsubscribe from this list please send an email message to:
G majordomo@sunmanagers.ececs.uc.edu
E and in the BODY type:
R unsubscribe sun-managers
S Or
. unsubscribe sun-managers original@subscription.address
L To view an archive of this list please visit:
I http://www.latech.edu/sunman.html
S
T
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:14:13 CDT