Problem resolved - Thanks to:
The problem was related to the SCSI connection to our STK 9710 tape silo.
As suggested by George, I disconnected all SCSI devices and reconnected
them one by one until the culprit was uncovered.
To: 'sun-managers' <firstname.lastname@example.org>
03:24 PM Subject: SPARC 20 - Boot Problems(Document link: Dona Ashcroft)
Hi All -
We have a SPARC20 that we use as a test box. I haven't used it in a few
weeks, now it won't boot. I'm stumped.
The memory checks ok, then I get the following:
Boot device: /iommu/sbus/espdma@f,400000/esp@f,800000/sd@3,0
SunOS Release 5.7 Version Generic [UNIX(R) System V Release 4.0]
Warning /iommu@f, e0000000/sbus@f,e0001000/dma@3,81000/esp@3,80000(esp5):
Connected command time out for Target 0.0
WARNING: /iommu@f,e0000000/sbus@f e0001000/dma@3, 81000/esp@3, 80000
polled command timeout: current esp state:
esp: State=RESET Last State=SELECT
esp: Latched stat=0x0 intr= 0x0 fifo 0x0
esp: last msg out: IDENTIFY; last msg in: <unknown msg>
esp: DMA csr=0x40040010 <INTEN>
esp: addr=fc003200 dmacnt=e00 last: fc003200 last_cnt=7
esp: Cmd dump for Target 0 Lun 0:
esp: cdblen=6, cdb=[0x12 0x0 0x0 0x0 0x30 0x0]
esp: pkt_state=0x0 pkw_flags=0x808 pkt_statistics=0x60
esp: cmd_flags=0x1462 cmd_timeout=0
The messages above repeat continually until I do a stop a
Stop d does not work
probe-scsi comes back okay
test-memory comes back with no errors
cannot boot from cd_rom either
I'm new to the SPARC/Sun enviroment.
I've looked through the archives and throughout Sun's website, but can't
find anything to help.
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:14:08 CDT