Hi all !
Thanks to everyone who replied.
The resolution to the problem appears to have been ......
We have only just noticed (doh !) that the disks differed slightly
3. c0t10d0 <SEAGATE-ST336704LC-0002 cyl 14087 alt 2 hd 12 sec 424>
/pci@1f,4000/scsi@3/sd@a,0
4. c0t12d0 <SEAGATE-ST336704LC-0001 cyl 14087 alt 2 hd 12 sec 424>
/pci@1f,4000/scsi@3/sd@c,0
We formatted and labelled selecting both disks the same disk type
-0002 > -0001
and the system no longer dumps on the vtoc.
Again thanks to everyone who took the time and trouble
regards
Tony
ORIGINAL POST
Hi all !
I have an Enterprise 250 running Solaris 7 (32-bit) with the following disks:
# format
Searching for disks...done
c0t10d0: configured with capacity of 34.18GB
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <SEAGATE-ST318203LC-0001 cyl 9770 alt 2 hd 12 sec 303>
/pci@1f,4000/scsi@3/sd@0,0
1. c0t8d0 <SEAGATE-ST318203LC-0001 cyl 9770 alt 2 hd 12 sec 303>
/pci@1f,4000/scsi@3/sd@8,0
2. c0t9d0 <SEAGATE-ST318203LC-0001 cyl 9770 alt 2 hd 12 sec 303>
/pci@1f,4000/scsi@3/sd@9,0
3. c0t10d0 <SEAGATE-ST336704LC-0002 cyl 14087 alt 2 hd 12 sec 424>
/pci@1f,4000/scsi@3/sd@a,0
4. c0t12d0 <SEAGATE-ST336704LC-0001 cyl 14087 alt 2 hd 12 sec 424>
/pci@1f,4000/scsi@3/sd@c,0
5. c4t2d0 <CHAPTEC-K7413-K1.1 cyl 34036 alt 2 hd 32 sec 128>
/pci@1f,2000/scsi@1/sd@2,0
6. c4t2d1 <CHAPTEC-K7413-K1.1 cyl 34036 alt 2 hd 32 sec 128>
/pci@1f,2000/scsi@1/sd@2,1
I want to install Sybase onto the two 36Gb drives, however after labelling
etc, If the system is rebooted the disks LOSE their labels:-
May 3 13:18:51 e250nfs unix: Vendor 'SEAGATE', product 'ST336704LC',
71687369 512 byte blocks
May 3 13:37:38 e250nfs unix: WARNING: /pci@1f,4000/scsi@3/sd@a,0 (sd9):
May 3 13:37:38 e250nfs corrupt label - wrong magic number
May 3 13:37:38 e250nfs
May 3 13:37:38 e250nfs unix: Vendor 'SEAGATE', product 'ST336704LC',
71687369 512 byte blocks
May 3 13:37:38 e250nfs unix: WARNING: /pci@1f,4000/scsi@3/sd@c,0 (sd11):
May 3 13:37:38 e250nfs corrupt label - wrong magic number
Has anybody seen this before or can anyone point me at the correct
information please
TIA
Tony
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:14:07 CDT