Thanks for the replies from Marco Greene and Matthew Stier.
The problem was the first qfe card got moved to a different SBus slot. Then
when the second card got added, the kernel just pick up from where it left
off with the first card. Doing a "boot -r" didn't help. So, I had to edit
/etc/path_to_inst to reference the qfe entries to the proper sbus slots then
reboot.
I could also remove all the references to qfe in the path_to_inst then do a
"boot -r" to have the kernel rebuild the entries.
Thnx,
-Phil
-----Original Message-----
From: Phil Nguyen [mailto:pnguyen@flycast.com]
Sent: Tuesday, April 04, 2000 2:16 PM
To: 'sun-managers@sunmanagers.ececs.uc.edu'
Subject: qfe problem
I have an ultra-2 running Sol 2.7 with 2 qfe cards. My problem is the qfe
port number starts at 5 instead of 0, i.e. I have qfe5 through qfe12 instead
qfe0 through qfe7. dmesg shows the following error message
qfe4: ddi_getlongprop_buf() for hm-rev failed
qfe4: Treat this as HM 2.0
qfe4: ddi_add_intr failed
Have anybody seen this? TIA for any info.
-Phil
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:14:05 CDT