Thanks to Casper Dick with his response "yes, all configurations should
support that."
-----Original Message-----
Can Ultra10 (300MHz, Sol2.6) with OpenBoot 3.11 handle 1GB of memory?
I installed 1GB of memory and Ultra10 recognized it at the OK prompt.
I am getting these messages and machine crashes:
panic[cpu0]/thread=0x3002fe80: Async data error at tl1: AFAR
0x00000000.27ef0058
AFSR 0x000006c9.80300000
Feb 21 07:38:52 ultrauhpet3 unix: panic[cpu0]/thread=0x3002fe80: Async data
erro
r at tl1: AFAR 0x00000000.27ef0058 AFSR 0x000006c9.80300000
./memconf shows:
Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 300MHz) (Ultra 10)
socket DIMM1 has a 256MB DIMM
socket DIMM2 has a 256MB DIMM
socket DIMM3 has a 256MB DIMM
socket DIMM4 has a 256MB DIMM
empty sockets: None
total memory = 1024MB (1GB)
I am now going to re-seat the modules. Any other ideas? Thanks in advance. I
will summarize.
-Sundar Paramasivan
-----------------------------------------------------------
Sundar Paramasivan mparamas@iupui.edu
Systems Administrator
Indiana University Radiology/Imaging Science
------------------------------------------------------------
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:14:03 CDT