Thanks to all of those who responded in a very short time. Responses are
still arriving while I am typing this Summary! I should have searched Sun
Managers FAQ/Archive before I posted my question. I am sorry.
Summary of responses:
1) Answer is in Sun Managers FAQ/Archive.
At the O/S level:
2) /usr/platform/`uname -i`/sbin/prtdiag -v
/usr/platform/sun4u/sbin/prtdiag -v
(Note: -v lists only total memory
-pv lists memory module info, in a not-easy-to-understand way)
3) Use sysmon from Sun
4) Many suggested "memconf" perl script at:
http://netnow.micron.net/~tschmidt/memconf.html
http://netnow.micron.net/~tschmidt/memconf.html (Thanks to the author)
At the boot prompt:
5) Change the diag-switch? to true at ok prompt
setenv diag-switch?=true
setenv diag-mode=true
setenv boot=disk net
when restart the system then it shows you all the slots and
controller info.
I took the easy way; I used memconf, and I got what I wanted.
-Sundar
-----Original Message-----
I would like to add more memory to my Ultra-10 (Sol 2.6) machine.
Is there a way to find out how many memory slots are used, and how much
memory each used slot holds, WITHOUT opening the cover?
On HP-UX boxes, I can do this at the boot prompt.
--------------------------------------------------------------
Sundar Paramasivan mparamas@iupui.edu
Systems Administrator
Indiana University Radiology/Imaging Science
---------------------------------------------------------------
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:14:02 CDT