Thanks to all the replys. I finally got it working. The most complete
answer referred me to the following URL
http://www.SolarisCentral.org/opt/
which pointed me to another URL
http://www.cae.wisc.edu/~gerdts/ultra10_cdrecord.shtml
which gives step-by-step instruction on setting up cdrecord on a Ultra10.
My particular problem was related to the 32-bit vs 64-bit mode.
Thanks everyone,
Frank
==================================================
original post
> Help
>
> I am trying to get cdrecord working on an Ultra10. I installed a SCSI
> interface, attached to CD-RW drive, downloaded cdrecord, mkisofs and scg
> from Joerg Schilling's site. I just can't get it to work. About the only
> thing that works is "cdrecord -scanbus":
>
> # ./cdrecord -scanbus
> Cdrecord release 1.6.1 Copyright (C) 1995-1998 Jvrg Schilling
> scsibus0:
> 0) *
> 1) *
> 2) *
> 3) 'YAMAHA ' 'CRW4260 ' '1.0q' Removable CD-ROM
> 4) *
> 5) *
> 6) *
> 7) *
>
> If I try to write to the CD I get the following:
> # ./cdrecord -dummy -v speed=0 dev=3,0 /local_user/isoimage
> Cdrecord release 1.6.1 Copyright (C) 1995-1998 Jvrg Schilling
> TOC Type: 1 = CD-ROM
> ./cdrecord: Bad file number. Cannot get mmap for 4202496 Bytes on
> /dev/zero.
>
> I must have missed something. I know the CD-RW drive works since I
> moved it from an HP C160 running cdrecord. Can anyone help?
>
>
> ==================================================
> | Frank Velazquez |
> | Siemens Information and Communication Networks |
> | frank@hwdev.icn.siemens.com |
> ==================================================
>
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:14:02 CDT