Hi all,
This was my original problem and response:
>man/man -k do not work despite it being in MANPATH, and running >catman -w.
>
> When catman(1M) goes through the man page files and picks out the line
>following ".SH NAME" it is very picky about syntax. If there are macro
>commands "eg .PP .B etc" it screws up. I've found that
> typically I get the best results if I to edit the line following ".SH
>NAME" in the man page file then run "catman -w -M <path>" to rebuild the
>windex file.
>
> The line following .SH NAME should have the format:
>
> <entry> \- <description>
>
> <entry> should be a single word and should be the name of the file
> without the man section suffix. The backslash is optional.
I got two responses that I thought I'd post back. Thanks for responding both
of you.
Thomas Anders <anders@hmi.de>
Have you tried /usr/openwin/man/makewhatis to see if it works better?
The Solaris FAQ (2.2) keeps saying (for years) that one should use
makewhatis instead of catman and I wonder if this still holds true nowadays.
Phil_Armsdon@ACML.COM
I think there's a bug in man - try doing man -F
Please note I'd not had the chance to test any of this, but thought it it
was out there someone else could use this information.
Thanks,
Rasana
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:14:01 CDT