Well.. the tape drive is functional this morning... I took the strange little
off of the internal drive, then set the SCSI ID to 4 with a jumper on the drive
itself.. then did the reconfiguration reboot.
Thanks to all that helped!
> I just installed a dds3 tapedrive in two E250's here.. and I can't get the
> system to recognize the drive.. even after a reconfiguration reboot.
> There was an extra cable attached to the drive that doesn't seem to have
> a home for it's loose end... Does anyone have any ideas on what else
> I should do?
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:13:33 CDT