Hi Andres,
Thanks for your help. I solved this problem by using OE CD.
Regards,
Linh
At 08:58 AM 11/15/99 -0400, Andres Nieto wrote:
>Cam,
>
>This is a bug with the new 400-450 Mhz. SUN processors.
>
>Take a look at the following page in order to solve your problem:
>
>http://sunsolve.Sun.COM/private-cgi/retrieve.pl?doc=srdb%2F20576&zone_32=ide
>
>you need a Sun SOlve account to access this page.
>
>Basically, what you need is install Solaris using the Operating
>Environment Installation CD.
>
>Hope this helps.
>
>Andres.
>
>
>
>At 05:17 PM 11/13/99 +0700, Cam Linh Nguyen wrote:
>>Dear ALL,
>>
>>I've just had a new ultra60. I installed Solaris2.6 . After finishing
>>installation, I boot it with single mode. Whenever I type only one
>>character, the screen will display a series of that character. Under
>>CDE, everything is OK.
>>
>>Please see the below eeprom configuration file I attached .
>>
>>Pls avide me how to solve this problem. Is it hardware problem or
>>configuration problem ? The Solaris2.6 CDROM I used to install on this
>>ultra60, it's worked properly with the other ultra60.
>>
>>TIA,
>>
>>Linh
>>
>>
>>
>>
>>
>>
>>
>
>********************************************************************
> Schlumberger GeoQuest - Caracas
> Andrés A. Nieto P.
> IT Operations Engineer - Venezuela and Trinidad (VTG)
>
>GeoQuest - VTO voice: (58 2) 9074747
>Caracas, Venezuela alternate: (58 2) 907 4711
>email:anieto@caracas.geoquest.slb.com fax: (58 2) 976 3293
>
>********************************************************************
>
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:13:33 CDT