Summary: Solstice PPP

From: Sandeep Patni (spatni@lucent.com)
Date: Tue Sep 14 1999 - 09:29:32 CDT


I found the problem, When I was dialing out, the other side (server) was
prompting "ppp or telnet" question and was expecting "ppp" as an answer to start
the session.
so I modified the connect script and got connected. works very well.

Only response I received from Adzman SK <adzman@no1.nc.com.my>, he pointed me to
www.stokely.com. didn't solve my problem, but has lot of helpful information.
Thanks anyway.

sandeep
--------

Sandeep Patni wrote:
>
> Hi all,
>
> I am trying to setup PPP at home.
> Sparc 2, Solaris 2.6, Solstice PPP 3.0.1, dilaing into an ISP.
> I got the modem setup and configured PPP with pppinit script (preety simple). I
> selected Async client, and dynamic IP allocation from the script.
>
> Now when I dial-out, I get the modem connection and then it accepts
> login/password. and I gets disconnected.
>
> I see this in the log file,
>
> Done popping modules.
> Device up for ipdptp0
> IP_NCP starting on ipdptp0
> PPP error on ipdptp0: loop back detected <=== what's this ?
> check your connect script or PPP is not running on remote host.
>
> Any ideas what could be the problem ?
>
> tia,
> sandeep
> --------
> Sandeep Patni "Good judgment comes from experience, and
> Lucent Technologies lot of that comes from bad judgment."
> Holmdel NJ-07733
> E-Mail : spatni@lucent.com Phone : 732-949-1158

-- 
Sandeep Patni           "Good judgment comes from experience, and
Lucent Technologies           lot of that comes from bad judgment."        
Holmdel NJ-07733      
E-Mail : spatni@lucent.com    Phone : 732-949-1158



This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:13:25 CDT