Original problem was
>I have a headless Sun IPX where the PROM setting for ttya-mode is
>set to something other than 9600,N,8,1,-. To make matters worse,
>the input and output devices in the PROM are set to ttya and the
>machine is not on a network.
Thanks to the respondents:
Ray Saddler, Richard Smith & Kevin Sheehan.
Ray and Richard both suggested using eeprom(1M) but unfortunately, I
didn't have a shell to work with.
The idea of prying the eprom out was brought up (eek) but the answer
was to hold down L1 and N while booting to erase the NVRAM settings
which I found in monitor(1M) before Kevin also suggested it.
Thanks,
Andrew
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:13:25 CDT