Thanks to those who responded.
Casper Dik
Buhr Joseph
Mark Parry
I believe that Casper hit it on the head in my situation. Apparently for the
300 MHz CPU, I need a UPA terminator if I am only to have one CPU installed. I
guess I will have to call Sun and order one. Other responses were as follows:
In the past I've encountered that when I upgraded processors on one of our
enterprise servers it also required a prom upgrade.
joe
If memory serves correctly, tou will need to change *another* jumper setting to
allow PROM update, and apply the latest firmware upgrade to support that
processor. I believe this has been covered in another summary; check the
archives (http://www.latech.edu/sunman.html) for detail.
regds,
Mark Parry
I did find the patch that needed to be installed for my situation shortly after
I posted to this list, and I did install that patch with no luck. Therefore, I
believe that when I get the terminator, it should work.
Thanks again,
Chad Rytting
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:13:24 CDT