HI sunners,
Thanks to the following persons for their answers:
Mark Sherman <marksh@funb.com>
Shriman Gurung <SG@datcon.co.uk>
khaled <khaledt@sts.com.jo>
Bismark Espinoza <bismark@alta.jpl.nasa.gov>
The response is :
To disable rdiscd running, just make a file /etc/notrouter and it won't start.
In my case must i leave rdiscd running ?
>From Shriman Gurung, Generally speaking you __don't__ want these to run
when you have a dial-up interface, because you don't want them wasting
precious bandwidth on the link.
Yes it is wat i am going to do and test the network.
Thanks again to all
Best regards
####### original message
HI sunners,
Configuration :
Server SUN Ultra 10 with solaris 2.6 and the latest jumbo patch.
I have messages at boot with are :
"machine is a router" and then
"in.rdiscd[120]:setsockopt(IP_ADD_MEMBER_SHIP): address already in use",
the rest of the boot is correct.
My server has ppp configured (asppp.cf) in this case, and there is no file
/etc/defaultrouter. On the server, qpopper is running and ppp is used to
exchange mail with the internet gateway.
###### file asppp.cf
ifconfig ipdptp1 plumb 200.197.126.72 192.9.200.1 up
path
interface ipdptp1
#########
If i rename asppp.cf and reboot the previous messages did not appear (i
have only one interface in this case). But i can't receive messages from
the internet gateway.
My questions are :
how can i disable the error message of in.rdiscd ?
Must i leave rdiscd running ?
Thanks for any help, advice...
#######
Philippe Deverge
BP 134 98845 Noumea CEDEX
Nouvelle Caledonie
Email : deverge@noumea.orstom.nc
tel/fax : +687 27 19 35
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:12:52 CDT