Hi group,
I've received a lot of answers, almost all positive for an UltraAX(i)
system that you can build yourself or buy from a third party.
What I'm looking for now is a supplier of this Ultra AX system but in
Canada if possible ?
Anybody know a seller in Canada (Montreal region) ?
And again, thank's to:
Andreas Holzhammer <holzhammer@photogrammetrie.de>
> I bought it integrated from my hardware-supplier. you may check at
> http://www.transtec.de/doit/loadva/software/wwwdoit/applet/konfigurator//6UL10_D.html
Todd Fiedler <dev_null_4_spam@yahoo.com>
Timothy Lorenc <lorenct@load.com>
> If you are interested in putting together a cheap SPARC 20:
> Just need to buy a couple of other parts and for probably less
> that $2000 you could have a UNIX workstation at home...
> look at www.solarsys.com
Roger Fujii <rmf@lookhere.com>
>
> It's WAY easier to get it from a distributer like: www.eis.com.
>
> Got mine from there. Been pretty happy with it....
ian@masuma.com
> I'm typing this from a home made AXi system!
>
> It is a very simple job, all you have to do is buy the motherboard, a disk, CDROM,
> floppy, graphics card and case and put it together like a bog standard PC.
>
> The instructions in the Sun OEM manual are very clear. Check
>
> http://www.sun.com/microelectronics/ihv/AXi_ihvprod.html
>
> for a list of safe graphics cards.
>
> Do download the OEM manual and read it first.
>
> Ian
Becki Kain <bkain@erim.org>
> Bruce Sawler, Requisite Systems, email is bgs@req-sys.com (and
> I'm cc'ing him), phone is 530-268-7480. Very knowledgeable and
> they also sell memory for sparcs (if you have any old 10's laying
> around like I do!)
>
"Cooke, Earl R." <COOKEEA@mail.northgrum.com>
-- Simon-Bernard Drolet mailto:Simon-Bernard.Drolet@M3iSystems.QC.CA Unix System Administrator Tel: (450) 928-3386 ext. 2330 M3i Systems Inc. Fax: (450) 442-5076 Longueuil, Quebec, Canada http://www.M3iSystems.QC.CA
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:12:51 CDT