Thanks to all who responded, especially Brooke King (jbking@sandia.gov).
The solution was to install the LATEST version of HP JetAdmin from
http://www.hp.com/cposupport/jsnav/netprn.html. Also, in order to get
JetAdmin to run on SunOS 4.1.3 I had to install /bin/ksh. I found a free
version of ksh available from
http://sunsite.unc.edu/pub/Linux/system/shells/pdksh-5.2.8.tar.gz. This
compiled cleanly under SunOS 4.1.3 using gcc 2.8.1.
Original Question:
> From: Kevin Korb [SMTP:kmk@crc.com]
> Sent: Tuesday, October 13, 1998 11:31 AM
> To: sun-managers@sunmanagers.ececs.uc.edu
> Subject: printing to 8.5x11 or 11x17 on same printer
>
> Sun Managers,
> I am trying to setup an HP LaserJet 5000 printer (postscript) with
> 2 paper trays. I need the printer to be able to print postscript to either
> 8.5x11 in the top tray or 11x17 in the bottom tray. I am running SunOS
> 4.1.3 on an old Sparc 2 and need a solution that will allow my SGI Irix users
> to print on either paper using the Sun as a print server. Any sugestions
> would be very helpfull.
> I will summarize.
> TIA
>
>
>
> ~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*
> Kevin Korb Phone: (407) 354-0047 x2122
> Systems Administrator Email:
> Coleman Research Corp. kmk@crc.com (work)
> Launch Systems Group kmk@sanitarium.net (personal)
> Orlando, Florida http://www.sanitarium.net/
> PGP public key available: finger:kmk@magicnet.net
>
> ~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
Kevin Korb Phone: (407) 354-0047 x2122
Systems Administrator Email:
Coleman Research Corp. kmk@crc.com (work)
Launch Systems Group kmk@sanitarium.net (personal)
Orlando, Florida http://www.sanitarium.net/
PGP public key available: finger:kmk@magicnet.net
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:12:50 CDT