Hi suners,
finaly I found out that the internal cabel in external box was bad.
Thanks to all who responded.
Jozef
hera are the original question:
Hi suners,
did you manage to get work external disk SEAGATE ST31940W Medalist
with Netra I 170E or Ultra 1/170E which has wide external SCSI conector.
I conected this external disk to Netra I 170E. In ok prompt I saw
this disk througt probe-scsi, then i boot mechine with -r parameter
to reconfigure kernel, but during booting i saw messages
like cannot write in wide mode and then cannot read from disk
sd2 ( which is this one ). In machine are two disk sd0 and sd1, there
is no other external devices.
I used this disk with ultra1/143 and it works in narrow mode cause
this ultra has only narrow SCSI.
First I suspected external cable, but it didn't work with
the other new one either.
--------------------------------------------------------------------
Jozef Rujak e-mail: dodi@intas.sk
INTAS phone: +421 95 6335012
Stromova 10 fax: +421 95 6335013
040 01 Kosice http://www.intas.sk
Slovak Republic
--------------------------------------------------------------------
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:12:50 CDT