-----BEGIN PGP SIGNED MESSAGE-----
December 26, 1997
We had been experimenting with the Solstice SyMon and the Domain
Manager v2.3 rel.B to create a network operations center. We wanted
to be able to remotely diagnose/monitor the remote and critical Sun
servers using the SyMon s/w under the umbrella of the Domain Manager.
Here was my problem post:
> We are trying to integrate our Enterprise 4000 machine's Solstice
> SyMon with our SunNet Domain manager 2.3 r2 ..
> We cannot get any Quick Dump results from the SunNet Mgr., although
> the Quick Dump menu shows the SYMONMIB submenu. We also cannot do
> Event and Data requests.
> For the Event and Data requests, our errors are
> Warning: Request SYMONMIB.sunsymon.1:
> Agent error: Missing attribute: trapText
> For the Quick Dump error:
> No data.
> We have already copied SYMONMIB.oid, SYMONMIB.schema, and
> SYMONMIB.traps and to the /opt/SUNWconn/snm/agents subdirectory.
Many thanks to the folks who tried to help,
Steve Sun <ssun@BayNetworks.COM>
Robert Angelino <email@example.com>
But special mention goes to Ken Pepple <firstname.lastname@example.org>
who pointed out:
> Your problem is a limitation of SyMON. If you look into the
> SyMON MIB, you will find that the only thing defined is a single
> generic trap. There is no variables to be polled for.
I think that explained a lot for me. Anybody else have any ideas
how to create an NOC for critical Sun servers only? Using SNMP?
Thanks again and Happy Holidays to all!!!
Drexx Laggui <email@example.com>
Senior Systems Engineer, CSA
-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 5.0i for non-commercial use
-----END PGP SIGNATURE-----
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:12:12 CDT