Dear Sun Managers,
Thanks to those who replied to my posting, which is appended. Dave
Mitchell and Artur Schnayder suggested the following parameters for dd
and/or restore, some of which I hadn't attempted.
dd if=/dev/nrst0 obs=1024 | restore rvf -
dd if=/dev/nrst0 ibs=96b obs=126b | restore rvf -
restore -rvfb /dev/nrst0 96
Unfortunately, that didn't solve the problem. Joel Lee suggested that
special drivers might be required that were missing from the crashed
system, but the drive is a Sun 4 mm DDS DAT that is supported on SunOS
4.1.3_U1 Rev. B. The problem is unresolved, so I would be glad to hear
additional suggestions. I will summarize again if a solution is found.
Thanks,
Alan
> ----------
> From: Ronemus AD (Alan)
> Sent: Tuesday, November 04, 1997 11:32 AM
> To: 'Sun Managers List'
> Subject: Problems with Local Restore of Remote Dump
>
> Dear Sun Managers,
>
> I have encountered a strange problem with doing a restore on a
> local Sun 4mm 2/5 GB tape drive from a tape made using rdump to the
> same drive. My environment is SunOS 4.1.3_U1 Rev. B on a sun4
> (SPARCstation 4/370). The tapes were maded using the command:
>
> rdump 0uctbsdfv 1 96 5000 61000 remote_tape_host:/dev/nrst0
> local_partition_name
>
> After a disk crash and installing new disks, I loaded the mini-root
> from CD and attempted to restore from the same tape drive mounted
> locally with the following command:
>
> restore rvf /dev/nrst0
>
> This failed with the error message "record size (512) is not a
> multiple of dump block size (1024)." I attempted to resolve this
> using dd as follows:
>
> dd if=/dev/nrst0 ibs=1024 conv=sync | restore rvf -
>
> This produced a checksum error and an error message from restore that
> the tape was not in dump format. When I leave out the conv=sync
> option I get error messages about a partial block read as well as the
> checksum. I've tried a variety of block sizes in restore and dd
> without success. I have a number of files on the tape and all produce
> the same results, as does using the SunOS 4.1.4 CD to load the
> mini-root.
>
> I finally did a complete install from the CD and with the correct
> network configuration. I put the DAT drive on the original tape host
> (SunOS 4.1.3_U1 Rev. B, sun4m (Sparc5)) and was able to restore using
> the following command:
>
> rrestore rvf remote_tape_host:/dev/nrst0
>
> This worked, but required more time and effort than restoring locally
> using the mini-root from the CD. Does anybody know a workaround? I
> will summarize.
>
> Thanks,
> Alan
>
> Alan Ronemus Telephone: (304)747-3651
> Union Carbide Corporation Facsimile: (304)747-5430
> 3200 Kanawha Turnpike E-mail: ronemuad@ucarb.com
> P. O. Box 8361
> South Charleston, West Virginia 25303
>
>
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:12:08 CDT