SUMMARY: DAT "internal target failure"

From: Stuart.Little@dpcs-sw.co.uk
Date: Wed Sep 17 1997 - 09:01:22 CDT


Original post:-
>
> We have have an engineer on a customer site having problems
> with a Sun 4G DAT drive on Solaris 2.4:-
>
> unix: WARNING: /iommu@f,e0000000/sbus@f,e0001000/espdma@f,400000/esp@f,800000/st@4,0 (st4):
> Sep 16 13:25:20 unix: Error for command 'space' Error Level:
> Sep 16 13:25:20 unix: Fatal
> Sep 16 13:25:20 unix: Requested Block 8008, Error Block: 8008
> Sep 16 13:25:20 unix: Sense Key: Hardware Error
> Sep 16 13:25:20 unix: Vendor 'ARCHIVE':
> Sep 16 13:25:20 unix: ASC = 0x44 (internal target failure), ASCQ = 0xc2, FRU = 0x0
>
> The error occurs on command read, then space, then rezero/rewind.
>
> Drive has been cleaned, cables + terminator checked.
> Anybody know exactly what this error is? It isn't an FAQ and
> isn't in INFODOC 11371, Solaris Common Error Messages.
>
> A quick response would be appreciated as I'm trying to decide
> whether to send a replacement drive to the site.

As expected concensus was that the drive was at fault. As it
turned out the fault was intermittent, with some tape
copying/system dump operations completing successfully, others
not. I didn't receive an exact description of what the error
really meant, but have gone for a replacement anyhow.
Thanks to:-
Harvey Wamboldt <harvey@iotek.ns.ca>
uq616008@hsc.hac.com "Mark"
<Glenn.Satchell@uniq.com.au>
<Lori.Blake@Frogtown.Com>
and any others whose replies are on their way...

---
Stuart Little          E-mail:<Stuart.Little@dpcs-sw.co.uk>
Systems Support/Design Phone: +44-1462-440996
SysAdmin               Fax:   +44-1462-431440
..........supporting Alcatel Submarine Networks, UK



This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:12:03 CDT