hi,
the problem is i didn't map the ip address of the
servers behind firewall to their mac address and do a route add
to route ip to the interface, since i am using network
traslation.
Thanx.
original question is below.
----------------------------------------------------------------
Swee-Chuan Khoo sckhoo@asiapac.net
System Administrator - Internet Evangelist
http://www.asiapac.net/~sckhoo/ #include <std.disclaimner>
----------------------------------------------------------------
Astronimical Soc M'sia http://www.asiapac.net/~sckhoo/asm.html
"Simplify - There is no value in complexity, it's too difficult to
manage."
---------- Forwarded message ----------
Date: Thu, 24 Jul 1997 00:24:53 +0800 (SGT)
From: Swee-Chuan Khoo <sckhoo@asiapac.net>
To: sun-managers@ra.mcs.anl.gov
Subject: checkpoint firewall - no route?
Followup-To: Swee-Chuan Khoo <sckhoo@asiapac.net>
hi,
i have a i20 with checkpoint 3.0 instaled with a quad card.
le0 connected to router and qe0 connected to a hub to protected
network.
A U2 machine running mail/web server is connected to the
hub. Just now, after we did a reboot on both machine, U2 machine
can ping firewall (i20) but can't ping beyond that, like hosts
outside firewall, not even the router.
Before the reboot, everything works ok, anything wrong?
Thanx.
----------------------------------------------------------------
Swee-Chuan Khoo sckhoo@asiapac.net
System Administrator - Internet Evangelist
http://www.asiapac.net/~sckhoo/ #include <std.disclaimner>
----------------------------------------------------------------
Astronimical Soc M'sia http://www.asiapac.net/~sckhoo/asm.html
"Simplify - There is no value in complexity, it's too difficult to
manage."
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:11:59 CDT