Thanks for the response.
Here is the original message:
From: Geoff Lamb - EEA/TOS [SMTP:email@example.com]
Sent: Wednesday, April 02, 1997 9:42 PM
Subject: changed files from installation
I am going to be upgrading a sparc 20 with a storage array running
to an Ultra running Solaris 2.5.1.
The machines will be called the same thing after the change and the
Array is moving as well. The Array is using Veritas.
Is there a utility that tells me all the files that have been modified
the initial install? This is pretty tough as we also do a lot of Post
stuff. But a list of files to check would be a good start.
Anyone done this sort of thing and had problems? I am a bit worried
moving the storage array with Veritas on it.
I did the move on the weekend and it went very well.
The Storage array moved without a hitch running the commands (from SSA FAQ
on sunsolve INFODOC ID: 13420)
1 shutdown on first system
2 on new sytem:
vxiod set 10
vxconfigd -m disable
vxdctl init hostname
3 import all other disk groups
4 mount and share!!
No problems what so ever
The machine is basically an NFS server so there was not too many files that
I had to copy accross. I found them with a find command and just went through
Thanks again for the help.
/ \ Geoff Lamb, Ericsson Data Australia
| (o)(o) Internet: firstname.lastname@example.org
C .---_) Phone: +61 3 9301 3597
| |.___| Fax: +61 3 9301 3566
Segmentation fault (core dumped)
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:11:51 CDT