Thank you to Mr. Andrew Moffat. His answer is correct. I don't need
worry about it. The following is his answer:
Someone probably already pointed this out.... this error message is generated
by newer revs of the SSA software when it probes a slot with no drive installed.
Double check the addresses and you should find they correspond with empty
slots - the warnings are nothing!
Cheers,
Andrew Moffat.
My original posting:
>>I have a Ultra Sparc E4000 (solaris 2.5.1) ans SSA-110 connect on it. I
>>check /var/adm/message and found some warning message on it, when I
>.reboot the system. Can anyone tell me what wrong on it? Thank you.
>>
>.
>>================== /var/adm/messages =================
>>
>>Mar 26 14:06:24 gis-db unix: ssd1 at SUNW,pln0: target 1 lun 0
>>Mar 26 14:06:24 gis-db unix: ssd1 is /sbus@2,0/SUNW,soc@d,10000/SUNW,pln@a0000000,78ae7f/ssd@0,1
>>Mar 26 14:06:24 gis-db unix: <SUN2.1G cyl 2733 alt 2 hd 19 sec 80>
>>Mar 26 14:06:24 gis-db unix: WARNING: /sbus@2,0/SUNW,soc@d,10000/SUNW,pln@a0000000,78ae7f/ssd@0,2 (ssd2):
>>Mar 26 14:06:24 gis-db unix: Transport error: incomplete
>>Mar 26 14:06:24 gis-db unix: WARNING: /sbus@2,0/SUNW,soc@d,10000/SUNW,pln@a0000000,78ae7f/ssd@0,3 (ssd3):
>>
>>.....
>>
>>Mar 26 14:06:29 gis-db unix: <SUN2.1G cyl 2733 alt 2 hd 19 sec 80>
>>Mar 26 14:06:29 gis-db unix: WARNING: /sbus@2,0/SUNW,soc@d,10000/SUNW,pln@a0000000,78ae7f/ssd@5,2 (ssd27):
>>Mar 26 14:06:29 gis-db unix: Transport error: incomplete
>>Mar 26 14:06:29 gis-db unix: WARNING: /sbus@2,0/SUNW,soc@d,10000/SUNW,pln@a0000000,78ae7f/ssd@5,3 (ssd28):
>>Mar 26 14:06:29 gis-db unix: Transport error: incomplete
>>Mar 26 14:06:29 gis-db unix: WARNING: /sbus@2,0/SUNW,soc@d,10000/SUNW,pln@a0000000,78ae7f/ssd@5,4 (ssd29):
>>Mar 26 14:06:29 gis-db unix: Transport error: incomplete
>>Mar 26 14:06:29 gis-db unix: dump on /dev/dsk/c0t10d0s1 size 215056K
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:11:50 CDT