I guess its occasionally good for someone to ask a question for which
everyone on the list has an answer (except moi, of course - all
responses were genuinely appreciated) - thank you all for taking the
time to address my question.
Envelope Please! The answer to my primary question was to create a
/etc/defaultrouter file in which the IP address of the router machine -
Thank you to many:
Glenn Satchell -
PK Shiu <email@example.com>
"Matthew Stier" <firstname.lastname@example.org>
email@example.com (David Procter) and many others.
Regarding the my mention of the resolv.conf, it turns out that that
file also needs to be created:
Karl Vogel<firstname.lastname@example.org> provided this helpful
search my.domain.goes.here another.domain.might.go.here
; try local name server first
; if local name server down, try these
A special award goes to "Chris Staunton" <email@example.com> who was able
to clarify how Microsoft's NT Proxy works:
I just finished an Proxy install on an NT server, it went very easily.
All you should have to do is point your programs that you are going to
use, ie Netscape to use the proxy server port address, it's really that
easy. If you need help with the proxy server please feel free to ask.
With Netscape 3.01 setting up a pointer to the Proxy Server is easy
7 just fill in the blanks under Options -> Network Preferences -> Manual
Proxy Configuration [View] just install the IP address and Port # (80 in
my case). Voila! The Sun's Netscape functions via the proxy.
Unfortunately, 1) Netscape News and Mail doesn't seem to know to connect
to the news server via the proxy, 2) it doesn't appear one can access a
proxy without using a application that is already designed to configure
to use a proxy, so command line telnet, ftp, ping, etc. don't function.
If someone knows how to point normal internet functioning toward a Proxy
I'd be all ears.
Finally, there were several people who recognized the limitations of my
thinking - that what I was looking for via the NT Proxy was more than
the Proxy was designed to perform. Chris Staunton writes:
One more thing, as for the pointing to the gateway machine just make
sure that you add a route to the gateway address. I'm not totally sure
but I think all you need for that is a file called defaultrouter in the
/etc directory. If you would like to see why look at the file called
inetinit in your /etc/init.d/ directory.
I wrote Vasu Vuppala:
If I establish a PPP connection with my ISP in which I am
assigned an address say 220.127.116.11 on the NT machine by server
18.104.22.168 and I can ping the 22.214.171.124 from the SUN via the
internal LAN, why can't I set the 126.96.36.199 as a gateway using the
"route add default 188.8.131.52 1" command line entry? I get "Network
is unreachable". (Incidently, the 184.108.40.206 address results in the
same response and I can't ping the .6 address either). Any thoughts?
The "network is unreachable" error will come if you do not have an entry
in the routing table for 220.127.116.11 network (assuming the netmask is
255.255.255.0). Check to see if you have such an entry by
But before that I'm not very clear on how you have setup your internal
LAN. Does the Sun have a network interface with 220.212.100.xx IP
Its true that what I am really after is a bonafide gateway for my LAN.
The NT Proxy gets me halfway there and for that I am delighted. I
imagine NT can do the whole gateway job, but I will probably use a BSDi
Unix box for that ( I have email tech-support there).
So the short story on that vein is there's more work to be done, but
I genuinely appreciated the resource this list provided me and provides
to others. Thanks again,
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:11:49 CDT