Thanks to all who replied
Stephen Harris <sweh@mpn.com>
donf@brother.com (DON FREELEY)
wiles@geordi.calspan.com (Dale Wiles)
Rich Kulawiec <rsk@itw.com>
djohnson@nbserv2.dseg.ti.com (Danny Johnson)
Kevin.Sheehan@uniq.com.au (Kevin Sheehan {Consulting Poster Child})
einari@complex.is (Einar Indridason)
Peter Bestel <peter.bestel@uniq.com.au>
The original post:
I am running Solaris 2.4 and frequently when I list the contents of a tar tape or tarfile (tar tvf) I get the following:
tar: impossible file type-rw-rw-r-- 0/1 143276 Feb 20 17:22 1997 xxfile
Yet when I extract the files, they tar off correctly -is this something I should be concerned about or how do I fix this? patches ?
The answers:
1. most replies suggested that the file or tape was made on an HP or DEC or SGI etc. and GNUtar was suggested.
2. Some suggested that the file or tape was created with GNUtar,Again loading and running GNUtar was suggested.
Gnutar was installed and tested on several files and tapes of unknown tar origin and all listed out properly without giving any errors.
many thanks,
Jim Musso
System Manager
CDI Cad Services
3137 E. Elwood Street #160
Phoenix, Az. 85034
jam@cdi.cdicad.com
602-431-4413
602-431-4422(fax)
CCCCCCCC DDDDDDDDD III
CCCCCCCCC DDDDDDDDDDD III
CCC DDD DDD III
CCC DDD DDD III
CCCCCCCCC DDD DDDDDDD III
CCCCCCCC DDD DDDDDD III
"Those who would sacrifice liberty for temporary safety, deserve neither
liberty nor safety." -Benjamin Franklin
***OPINIONS ARE MY OWN-NOT CDI CORPORATION***
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:11:48 CDT