Hi,
My original question is attached below. I still haven't solved my
problem, so help are still appreciated.
Thanks to
"Karl E. Vogel" <vogelke@c17mis.region2.wpafb.af.mil>
Tim Carlson <tim@santafe.edu>
popp@corpmail.nwest.attws.com (Jeff Popp)
Ross Stocks <ROSS.STOCKS.PSD36651@nt.com>
who all suggested me to do the restore interactive. I did with
ufsrestore -if <dumpfile>, and that command also got into a
loop:
ufsrestore -if ufsdump.7.c0t2d0s7
...
ufsrestore > extract
You have not read any volumes yet.
Unless you know which volume your file(s) are on you should start
with the last volume and work towards the first.
Specify next volume #: 1
You have read volumes: 1
Specify next volume #: 1
Mount volume 1
then enter volume name (default: ufsdump.7.c0t2d0s7)
You have read volumes: 1
Specify next volume #: 1
Mount volume 1
then enter volume name (default: ufsdump.7.c0t2d0s7)
You have read volumes: 1
Specify next volume #: 1
Mount volume 1
then enter volume name (default: ufsdump.7.c0t2d0s7)
You have read volumes: 1
Specify next volume #: 2
Mount volume 2
then enter volume name (default: ufsdump.7.c0t2d0s7)
Wrong volume (1)
You have read volumes: 1
Specify next volume #: 2
Mount volume 2
then enter volume name (default: ufsdump.7.c0t2d0s7)
Wrong volume (1)
You have read volumes: 1
------- Start of forwarded message -------
Return-Path: <ulla>
Date: Thu, 16 Jan 1997 16:52:33 GMT
From: Ulla Fischer <ulla>
To: sun-managers@eecs.nwu.edu
Subject: Help to restore a dump-file
Content-Type: text
Content-Length: 1047
Hi,
I have a level 4 dump-file on my filesystem, which I cannot
restore. Here is what I do:
#/usr/sbin/ufsrestore fx ufsdump.4.c0t2d0s7
You have not read any volumes yet.
Unless you know which volume your file(s) are on you should start
with the last volume and work towards the first.
Specify next volume #: 1
.. after a while it says ....
Mount volume 2
then enter volume name (default: ufsdump.4.c0t2d0s7)
.. if I just type return, it says
Wrong volume (1)
Mount volume 2
then enter volume name (default: ufsdump.4.c0t2d0s7)
How do I get out of this loop, and continue with the restore?
As far as I know, the dumpfile has never been to tape, it has been
made directly onto a filesystem, and put into our nfs based archieve
system.
------- End of forwarded message -------
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:11:43 CDT