A delayed summary, the original sender asks me to forward this
'cause he seems to be unable to reach the list.
------------------------------------
Return-Path: mdoshi@Guanine-Eth0.BCHS.UH.EDU
Received: from guanine.bchs.uh.edu (Guanine-Eth0.BCHS.UH.EDU [129.7.2.122]) by
obelix.WHU-Koblenz.de (8.8.2/8.6.4) with ESMTP id AAA25145 for
<nhk@WHU-Koblenz.de>; Sat, 16 Nov 1996 00:57:35 +0100 (MET)
Received: (from mdoshi@localhost) by guanine.bchs.uh.edu (8.7.5/8.7.3) id
RAA17149 for nhk@WHU-Koblenz.de; Fri, 15 Nov 1996 17:57:08 -0600 (CST)
From: Manish Doshi <mdoshi@Guanine-Eth0.BCHS.UH.EDU>
Message-Id: <199611152357.RAA17149@guanine.bchs.uh.edu>
Subject: Re: Printing on B-Size paper
To: nhk@WHU-Koblenz.de (Nils-Henner Krueger)
Date: Fri, 15 Nov 1996 17:57:08 -0600 (CST)
In-Reply-To: <199611141313.OAA28765@obelix.WHU-Koblenz.de> from "Nils-Henner
Krueger" at Nov 14, 96 02:13:04 pm
Return-Receipt-To: mdoshi@guanine.bchs.uh.edu
X-Mailer: ELM [version 2.4 PL24alpha5]
Content-Type: text
>
Seems like my mails to sun-managers r not going thru.
This is what I did.
I installed jetadmin. ( I hate to do it but did it anyway!!)
Under jetadmin you have a nice interface for your printers set up.
After you do that. Either u can give ur printer an lp -o 11x17
command and it will print on that size or to make it
permanent go to /etc/lp/interfaces and open the
file for ur printer. Modify options field to be
11x17 all the time and that will do it.
I have set up two queues for the printer.
1. for 11x17 printer and second one for 8.5x11 paper.
If this reaches you can u pl. forward it on sun-mangers for me?
Hopefully it will work for you also.
Good luck!!
Thanks once again to everybody who helped
>
> > I have an HP LaserJet 4mv printer. It understands postscript files.
> > I can print anything on A4 size paper. But if I want to
> > print anything on 11x17" paper then I have to send it with
> > a control sequence. Problem is I'm not able to get
> > any filter to do this for me. Plus my printer only understands postscript.
> > So if I send the control sequence first then I can't get it to print
> > postscript. It doesnot recognize new line character with simple text.
> > My printer is on ethernet and has an IP address.
> >
> > I want it to do following for me:
> > 1. print simple files on A4 and 11x17 size papers
> > 2. print postscript on A4 and 11x17 size papers.
>
> Did you get any helpfull answers to your question?
> I've got the same problem, did I miss your summary?
>
>
> nhk
>
>
>
-- "You can not discover new oceans unless you have the courage to lose sight of the shore" - Anonymous"There is nothing more constant than change" - Anonymous
Manish Doshi, .............. ___ _/| .. __ __ .. ___ _/| ........... Dept. of Computer Science \ x x ' / o O \ \ o O University of Houston ( ^ ) ( ^ ) ( ^ ) Houston, TX 77004 ............. U ........ U ........ ~ ...............
Email :- mdoshi@uh.edu Work:(415)253-0839 Home:(415)967-3445 URL: http://www.bchs.uh.edu/~mdoshi
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:11:16 CDT