Thanks to Alberto Begliomini for a quick (and accurate) response!
This solution solved my problem exactly.
Brian
Date: Thu, 12 Sep 1996 13:22:02 -0700
From: aub@atmsys.com (Alberto Begliomini)
To: wightman@oberon.acs.uwosh.edu
Subject: Re: Remote printer faulting with jetadmin
Oh well, I ran into this problem _exactly_ this morning! The problem is that
the tcp port listener is not active. An easy way to fix it without going through
the pain of using pmadm and sacadm (you may want to take a look at the aswerbook
though) it to create a dummy local printer using admintool and then remove it.
This does the trick.
Al
> I have a problem printing from Sol2.5 client to Sol2.5 server.
>
> The server is running the latest JetAdmin (hpnpd, etc) software for
> Solaris 2.5 from the HP web site.
>
> I set up a local queue on the print server,
> and can print from the server to the printer without a problem.
>
> When I start to add clients, I run into problems.
>
> After the first job is submitted to the client, lpstat -p gives me
> [me@host] /tmp (2) > lpstat -p
> printer d307b faulted. enabled since Thu Sep 12 12:13:30 CDT 1996. available.
> system not responding
>
> I can find nothing in the lpadmin man page to explain this behavior.
>
> Any suggestions?
>
> Brian
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:11:10 CDT