Thanks to all who responded!!
Original question:
-----------------
Can someone please tell me what parameters I need to use
with the "usfdump" command using a 112m 8mm tape on a
5GB 8mm tape drive?
Answer:
------
- On Solaris 2.x system, no special parameters are needed, but it
doesn't hurt.
Ex.:
ufsdump 0udsbf 54000 13000 126 /dev/rmt/0m /dev/rdsk/c1t1d0s0
- On SunOS system use:
Ex.:
dump 0udsbf 54000 13000 126 /dev/rstn /dev/sdxx
where
d = tape density 54,000 BPI
s = size (tape length) 13,000 feet
b = blocking factor 126 (512B blocks) = 63KB
f = file/device /dev/sdxx
Special Thanks to:
------------------
tkevans@eplrx7.es.dupont.com (Tim Evans)
seanm@sybase.com (Sean McInerney)
daves@adnc.com (David Schiffrin)
jjr2@edi-nola.com (Jack Reiner) (I'll get back to you)
gmp@adc.com (Gregory M Polanski)
iv08480@issc02.mdc.com (Colin Melville)
Thanks, Mark
------------------------------------------
Mark Hargrave, Sr. Unix Systems Manager
Lockheed Martin Manned Space Systems
E-Mail: meh@wisdom.maf.nasa.gov
------------------------------------------
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:11:05 CDT