The problem posted was repeated SCSI "reset" errors in my SS-2 with Seagate
2.1GB HD, newly installed, after failure of two smaller HDs.
email@example.com (Don Lewis)
Agris Krusts <firstname.lastname@example.org>
email@example.com (Michael Sullivan)
Haisong Cai <firstname.lastname@example.org>
for helpful letters, suggesting some of the usual suspects
(bad cables, power supply too weak for the larger HD)
... the machine was sent for service, and it was discovered that the SCSI
chip itself was at fault. The problem was resolved with minimal expense,
and all is well.
-- David L. Elliott, Vis. Sr. Res. Sci. Institute for Systems Research/ A.V. Williams Building University of Maryland/ College Park, MD 20742 (Prof. Emeritus, Washington University) delliott@ISR.umd.edu
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:11:01 CDT