Looks like it can't be done.. yet..
The X11R6.1 devices only support up to a cg12(?)... the Fast Frame buffers
are not supported yet.
>Are there any modes needed for X11R6.1 and Sun's 3D Creator Card? Or
>will it all just work right out of the box?
From: Glenn Satchell - Uniq Professional Services
Date: Tue May 7, 9:52
I'd suggest that if you want to take full benefit of the hardware
acceleration you'd need to be using the XGL interface, since Sun's XGL
knows how to drive the card to full potential.
Chances are that it will default back to a dumb framebuffer, but that's
not what you paid the big bucks for is it?
-- Glenn Satchell email@example.com | There's a fine line Uniq Professional Services Pty Ltd ACN 056 279 335 | between fishing and PO Box 70, Paddington, NSW 2021, (Sydney) Australia | standing on the shore Phone 02 380 6360 Pager 016 287 000 Fax 02 380 6416 | looking like an idiot. VISIT OUR NEW WEB SITE http://www.uniq.com.au ----- From: Casper Dik <casper@holland.Sun.COM> Date: Tue May 7, 9:08
You'll need to use Sun's Xserver (you can run the R6 clients and unless you depend on R6 specific extensions, you're better of running Sun's X server.
-- Name:Trevor Paquette |Alberta Energy Company Ltd |Work:(403) 266-8400 Email:TrevorPaquette@aec.ca|3900, 421 7th Ave S.W. | Fax:(403) 290-8400 firstname.lastname@example.org |Calgary, Alberta, Canada |ICBM:51'05"N/114'01"W email@example.com |T2P 4K9 |Mind:In the Rockies..
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:10:59 CDT