Thanks for the quick response my original post follows.
The answer is that the TP interface on the Ultra is autosensing and can
work for both 100Mbps and 10BaseT networks.
Thanks to
Leif Hedstrom <leif@netscape.com>
and
Sydney Weinstein <syd@myxa.com>
who responded before I even saw my original post.
Justin Young http://hp1.engr.subr.edu/
2212 Heck Young Rd. Mechanical Engineering
Baker, LA 70714 Southern University
(504)-771-4070 justin@mesun12.engr.subr.edu
Hello.
We recently purchased an Ultra 1 w/ Creator 3D and are currently
networking via our MII port to an AUI adapter purchased from Sun.
Actually the MII is transceived to AUI then to BNC. My question... Is
the TP interface 100Mbps or 10Mbps? We plan to switch to 100MBps 'cause
our 10 MBps isn't cutting it. I've read the documentation and
it's rather confusing. Also we don't have a hardware contract with Sun.
Thanks in advance.
Justin Young http://hp1.engr.subr.edu/
2212 Heck Young Rd. Mechanical Engineering
Baker, LA 70714 Southern University
(504)-771-4070 justin@mesun12.engr.subr.edu
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:10:59 CDT