SUMMARY: STOP-A on serial terminal

From: Steve Phelps (steve@epic.co.uk)
Date: Mon Mar 25 1996 - 04:13:00 CST


Thanks for responses (too many to mention).

Machine can be halted by sending a BREAK signal. There is normally a key
labeled BREAK on most terminals but the same effect can be had by either
unplugging the serial cable or powering the terminal off then on.

-------------------------------------------------------------------------
Steve Phelps
EMG Limited
52 The Old Steine
Brighton, UK.

Voice: +44 1273 728686 extn. 406
Fax: +44 1273 821567

                GPF encountered in module MICROSOFT.DLL
                Stack contents: ";;@|Where Do You Want to Go Today?_&..."



This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:10:55 CDT