SUMMARY: bootparamd and jump-start

From: Laura Taylor (ltaylor@voom.bbn.com)
Date: Sat Mar 02 1996 - 20:50:36 CST


I was able to fix the problem shortly after sending out question.

Answer: empty the bootparams map.

Just use bootparams as a local file, not a map. Works great now.

-- Laura

> I am trying to jump-start a client from a 2.4 jump-start server.
>
> The problem is that I can't get bootparamd to answer the client,
> and thus the client gets RPC: Timed out
> No bootparam (whoami) server responding; still trying...
>
> I know that the server is seeing the clients requests because I
> can see them in snoop, and also, rarpd from the server returns the
> correct IP address. So the tftpboot link is good.
>
> The bootparams file appears to look fine...it looks like this:
>
> rake.bbn.com root=hootowl.bbn.com:/export/install/export/exec/kvm/sparc.sun4c.Solaris_2.4 install=hootowl.bbn.com:/export/install/config install_config=hootowl.bbn.com:/export/install/config
>
> ...where rake is the client, and hootowl is the server.
>
> I've trying doing the obvious things like starting up bootparamd in debug mode using
> the -d switch, but that is giving me nothing useful.
>
> I could suspect network problems, but since snoop on the server shows the requests
> can be seen, I don't think it's the network. I have make a yp bootparams map using
> the above entry.
>
> I have the latest kernel patch and NIS patch installed.
>
> Any ideas?
>
> -- Laura
>
>
> ---------------------------------------------------------------
> BBN Corporation | Laura Taylor
> 150 Cambridge Park Drive | ltaylor@bbn.com
> Cambridge, Ma. 02140 | FAX (617) 873-4265
> U.S.A | (617) 873-4292
> ---------------------------------------------------------------
>



This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:10:54 CDT