Hi SUN Managers,
I wrote:
----- Begin Included Message -----
>From sun-managers-relay@ra.mcs.anl.gov Mon Feb 5 23:50:52 1996
Date: Mon, 5 Feb 1996 08:25:16 +0100
From: zdv123@zam092.zam.KFA-Juelich.de (V.Sander)
To: sun-managers@eecs.nwu.edu
Subject: Using GDM-17E10 Monitor on a PC
Hi SUN Managers,
we are trying to use several 17" Multisync
SUN-Monitors (GDM-17E10) via 13W3 to VGA connector
on a PC.
But there is no result, the monitor relays in Power-Save
mode (i.e. the unit goes into suspend mode).
That means, that either H sync or V sync aren't within
that specified for the monitor.
Suggestions?
Thanks,
Volker
----- End Included Message -----
The monitor is not really Multisync.
Especially it will not sync at the default VGA rate at power
on. The GDM17E10 will only sync at frequencies near:
1152 x 900 71.81KHz Horiz / 76.14Hz Vert
1280 x 1024 81.13KHz Horiz / 76.11Hz Vert
One will need to buy a special PC video card, like one of the
DCSI Corporation.
Thanks to everyone who has responded
Volker
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:10:53 CDT