A totally underwhelming reponse (0, yes count them, 0 responses).
Failing to get a quick response from this list I turned to Sun. Less than
12 hours after logging the call, I was speaking to a Sun engineer who
confirmed the problem exists. The workaround is to specify a terminal type on
the command line, e.g. sag -T tek, as the bug is related to sag not picking
up the $TERM environment as documented. So thanx to Sun(UK).
> System: SS1000 running 2.5
>
> (Also seen on IPX and SS 1+ running 2.5)
>
> When trying to run 'sag' in a xterm in tektronics mode with TERM=4014, I get the
> message "can't open _Xt_J".
>
> The weird thing is a 2.4 version of sag gives the same error. A truss on the
> execution gives the problem as:
>
> argv: tplot M-_^?XtM-_^?JM-^X < /tmp/sag9398
> .
> .
> argv: /usr/lib/t4014 M-_^?XtM-_^?JM-^X
> .
> .
> open("M-_^?XtM-_^?JM-^X", O_RDONLY) Err#2 ENOENT
> .
>
> Capturing /tmp/sag9398 and running tplot manually gives the proper graph.
>
> Has anyone any clues?
>
> Thanks in advance
+-------------------------------------------------------------------------+
|Nick Murray email <nmurray@csd.abdn.ac.uk> |
|Computer Officer phone (+44 1224) 272307 |
|Dept. of Computing Science Fax (+44 1224) 273422 |
|University of Aberdeen |
|King's College |
|Aberdeen AB9 2UE |
|Scotland UK |
+-------------------------------------------------------------------------+
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:10:52 CDT