Summary of Tape Drive Problem ..
Thanks for the many responses. The information was certainly helpful.
I choose Kai's method, it works ! Thanks!
yl
ORIGINAL QUESTION:
----------------------------------------------------------------------
> We have a new Python DAT tape drive which is a 4324NP model. But,
> when I type "mt -f /dev/rmt/0 status", I receive the following message
> "/dev/rmt/0: no tape loaded or drive offline". I have loaded and
> unloaded the tape for several times but this didn't help.
ANSWERS:
----------------------------------------------------------------------
From: Thomas F. Smith ( tfsmith@access.mountain.net )
You need to place an entry in /kernel/drv/st.conf, an ascii file. I
hope the parameters needed are in your manual or available from the
supplier. Good luck.
----------------------------------------------------------------------
From: Tim Evans ( tkevans@eplrx7.es.dupont.com )
Did you 'boot -r' after installing the tape drive?
----------------------------------------------------------------------
From: Kai O'Yang ( oyang@mars.fcit.monash.edu.au )
We had to use /dev/rmt/0l or /dev/rmt/0ln to access the drive.
----------------------------------------------------------------------
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:10:52 CDT