Hello,
My original question is :
******* Begin included message **********
>Hello managers,
>
>When we booted our machine, SPARCstation IPC running Solaris 2.4, it has
>the following error message:
>
>" .....
> Testing
> 19ac bad 100c bad booting from sd(0,1,0)
> Instruction Access Exception Type b (boot), c (continue), n (new
>command mode)
>
> "
>If we typed 'b', the last line message appeared again, if we typed 'c', it >showed:
>
> " No program is active
> Type b (boot), c (continue), n (new command mode) "
>
>Could someone give us advice and hints to solve this problem?
>
********** End included message ************
Many thanks to:
Herbert Wengatz hwe@uebemc.siemens.de
Daniel Blander Daniel.Blander@acsacs.com
Kevin Sheehan Kevin.Sheehan@uniq.com.au
Casper Dik casper@holland.Sun.COM
All of them gave us good suggestions about how to check what's the problem with the machine. When we checked cache RAM, it said:
ok test-cache
100c bad 19ac bad 100c bad
ok
other tests, such as 'probe-scsi', 'test-memory', ..., look good (sd(0,1,0) is boot disk). So it means that the machine has a hardware problem, bad cache RAM.
Here we gave our special thanks to Herbert Wengatz who described in detail about this kind problem and told us how to test which part was bad and helped us to determine if it is a hardware problem or not.
Thanks you again to all who replied!
Lingxiu Jiao e-mail: lingxiu@cc.umanitoba.ca
Dept. of Geological Sciences Tel: (O) 204-474-8415
University of Manitoba
Canada
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:10:50 CDT