Dear sun-manager,
Thank you sooooo.. much for your quick responded and times. What happen was,
I did install WABI and it took the floppy entry out of /etc/vold.conf.
I did uncomment out the floppy line then stop and start volmgt. But, it still
not work. This morning I reboot the machine then I am in business.
Thanks a lot to
From: Glenn.Satchell@uniq.com.au (Glenn Satchell - Uniq Professional Services)
From: Steve Bloom <sbloom@columbia.wrc.noaa.gov>
From: clg@zygote.csph.psu.edu (Craig Gruneberg)
From: Simon Gibbons <simong@aifs.org.au>
From: gunn@lardav.com (David Gunn)
From: Petros Michalis <michalis@dpg.rnb.com>
From: johnm@thor (john McWilliams)
Tricia
--------------------------------
My question was:
----------------
In Solaris 2.3 I was be able to read floppy every time I put it in.
After upgrade to solaris 2.4, I can not be able to read my floppy.
I did the "volcheck" but nothing happend.
Summary:
--------
Did you also install WABI? This takes the floppy entry out of
/etc/vold.conf. Uncomment the line, then /etc/init.d/volmgt stop and
/etc/init.d/volmgt start and you should be in business.
-----
Dear Tricia,
Just in case you haven't looked, check to see if the vold daemon is
running (# ps -elf | grep vold). If it isn't there, then you should be
able to restart it with
# /etc/init.d/volmgt start
and, if you need to stop it
# /etc/init.d/volmgt stop
Best of luck,
Simon
-----
Do a ps -ef |grep vold and see if the volume manager is running.
Chances are it is not....
-----
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:10:31 CDT