Hello. Here I am again torturing myself. After making all the changes to
the following files described below to get PPP going on my Solaris 2.4 x86 box,
everything works up to the point where it logs me in automatically. However,
after that, in the window where I run "/usr/lib/uucp/Uutry -x9 -r annex",
after it logs in and gets the remote box to switch to PPP mode, , all I get is
about 25 lines of garbage, then LOGIN FAILED - failed
exit code 101
Conversation Complete: Status FAILED (this does not log me out)
I can't ping any hosts. So, anybody out there who got PPP going, what other
steps have I missed? Any help is greatly appreciated.
-----------------output for ifconfig -a:
lo0: flags=849<UP,LOOPBACK,RUNNING,MULTICAST> mtu 8232
inet 127.0.0.1 netmask ff000000
ipdptp0: flags=8d1<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 8232
inet 127.0.0.1 --> 136.152.64.1 netmask ff000000
ether 0:0:0:0:0:0
----------------------------------------
136...... is the machine I loginto (annex)...
-----------------output of pmadm -l:
PMTAG PMTYPE SVCTAG FLGS ID <PMSPECIFIC>
zsmon ttymon ttya u root /dev/term/a I -
/usr/bin/login - 9600 ldterm,ttcompat ttya login: - tvi925 y #
zsmon ttymon b - root /dev/term/b I -
/usr/bin/login - 38400 ldterm,ttcompat login: - - n #Modem - Dial-Out Only
-----------------------------------
---- /etc/asppp.cf file:
ifconfig ipdptp0 plumb pentell annex up
path
inactivity_timeout 240
interface ipdptp0
peer_system_name annex
------------------------
--- /etc/uucp/Devconfig file:
ACU cua/b - Any hayes
----------------------------
---- Devices file:
TCP,et - - Any TCP -
ppACU cua/b - Any hayes
Direct cua/b - Any direct
-------------------
------ Dialers file: (the only relevant part?)
hayes =,-, "" \dA\pTE1V1X4Q0S2=255S12=255S11=55\r\c OK\r \EATDT\T\r\c CONNECT
------------------
------- /etc/remote file:
cuab:dv=/dev/cua/b:p8:br#19200
annex:pn=6439600:tc=UNIX-19200:
24annex:pn=6439600:tc=UNIX-2400:
dialup1|Dial-up system:\
:pn=2015551212:tc=UNIX-2400:
hardwire:\
:dv=/dev/cua/b:br#19200:el=^C^S^Q^U^D:ie=%$:oe=^D:
[nothing changed below from original file]
----------------------
----- Systems file:
annex Any ACU 38400 6439600 "" P_ZERO ===> ppp name: pentell ssword: mypasswd\n\c
----------
Thanks again.
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:10:29 CDT