Earlier I sent:
> I need help changing the MTU size for Sun FDDI 3.0 drivers under
> Solaris 1.0. Is this merely a kernel file change or is there a
> command available? Can anyone help?
Solution:
Solaris 1
---------
Read the Manual , page 110 (chapter 6 SUNLINK FDDI Users Guide)
If you don't have it (that's me) then do the following:
1. Edit /usr/sunlink/nf/sys/sunif/if_conf.c
modify nf_mtu = <What ever size u want>
(default value is 4352 - valid range 1-4500)
2. cd /usr/sunlink/nf/sys/<arch>/OBJ
3. cc -O -I/sys -DKERNEL -sparc -c ../../sunif/nf_conf.c
4. ld -r -o nf.o if_nf.o smt.o nf_smtcore.o nf_conf.o
5. mv nf.o /usr/etc
6. Reboot the machine.
Solaris 2
---------
Use ifconfig to change mtu for interface. See man page for
details.
Many thanks to the following:
kalle@cs.wvu.edu
sdickson@aries.for.gov.bc.ca
pilonm@CCG.RNCan.gc.ca
allan@mazama.com
roy@mss.com
Al.Venz@seag.fingerhut.com
Scott.Kamin@Central.Sun.COM
oconnor%gecko.uucp@Germany.EU.net
cds@sanjose.ssds.com
stern@sunrise.East.Sun.COM
hjson@dauri.sies.co.kr
-- Doug Tassan EDS - Technical Products Div. E-Mail: tassand@tpd.eds.com Voice: (214) 612-6613
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:10:26 CDT