I'm sorry for the Daley. Thanks all of you for helping 4G hard disk problem;
"3 hard disk is OK but system won't boot with 5 hard disk drives."
My real problem was SCSI related. my co-worker (electric engineer)
told something like ;
(I do not know if everything described below is correct or not since
I'm not familiar with this type of thing.)
When the SCSI device is connected by cascade, the signal on the bus
become lower at the far end from the card.
Possible solution is
in stead of
The passive terminator (? which has no LED) consumes more signal
than the one with LED.
In my case, 4G drive consumes lose signal. I moved 4G drive to far
end of cascade line and replaced terminator to the one with LED.
I have no problem now.
-- ZEXEL USA, Inc. Haruhisa Tamai email@example.com
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:10:26 CDT