Thanks so much to all who reply. I forgot to mention that I'm running
SunOS V4.1.3
Endre Polgar and Glenn Satchell sent me the exact command that I wanted
which is :
ok> module-info
And if you're running Solaris 2.x, try:
from Kevin.Sheehan@uniq.com.au (Kevin Sheehan)
from x092306@hyperion.LANL.GOV (Jerry Weber CIC-2)
from josh@quartz.pacacc.com (Josh Personius)
% /usr/sbin/prtconf
% /usr/sbin/sysdef
% /usr/sbin/psrinfo
Aline...
Original question:
> Dear Sun Managers,
>
> Is there a way to check all the information about CPU from the monitor
> command on an SS10? Looks to me it checked everything else except CPU.
> I scanned thru the answerbook but can't find anything. Please help me
> what to look for.
> I did have sysinfo installed, but I would like to check from the monitor
> command after I upgaded to a new M-Bus module.
>
> I will summarize if there is enough interest.
>
> Thanks, Aline...
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:10:23 CDT