Holger Teutsch (firstname.lastname@example.org) wrote:
: Alan Robson wrote in article <email@example.com> :
: >I was also advised that I can explicitly set line characteristics with:
: > "" STTY=this'n'that
: >in the Dialers script as well. As it happens i don't need this; the line
: >settings are fine, but I mention it for completeness sake.
: My observation is that you MUST use
: "" STTY=cs8 "" STTY=-parenb "" STTY=-istrip "" P_ZERO
: if you want to use the same dialer for ppp. I think P_ZERO is NOT redundant
: to "" STTY=cs8 "" STTY=-parenb as dial(3) seems to use a kind of extra `soft'
: parity generation that is turned off with P_ZERO.
Thanks Holger. Perhaps I should have said that the connection between my
two machines is direct. For this connection P_ZERO by itself works fine.
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:10:21 CDT