Hi all.
I got total of ten reply ( never got this much when i was on list )
but 7 of them indicating format.dat. I forget to tell you that
we are already using same type of drives in SS-10 and S-4 workstations.
Vipin Chadha send me commands to slow down the scsi by
adb -w /vmunix
scsi_option ?0X58
$q
2 person indicating drive itself is bad, and that seems to the most
appropiate answer to me as one HP2247 drive is working as third drive in
the same machine and in the same conditions.
Thanks to
Boyd Flctchers
Vikram Dutta
Bob Yamaguchi
Jeff Woolsey
Russ Poffenberger
Vipin Chadha
Paul Hostrup
Ulla Fischer
Dean Mararian
Ross
Original Question was,
Dear Sun Managers,
I want to install third Harddisk on a SS-2 machine running
SUN OS 4.1.3. Existing two HardDisks are
Seagate ST1480N SCSI ID 0
HP 2247 SCSI ID 2
Third HardDisk is going to be HP 3323A.
First two Harddisk are on internal SCSI channels without
any terminators on it. Disk i am planning to add is on an
external shoebox. If i add this disk and run format i get
the message like :...
sd1c: Error for command 'read'
sd1c: Error Level: Fatal
sd1c: Block 2069886, Absolute Block: 2056008
sd1c: Sense Key: Illegal Request
sd1c: Error for command 'write'
sd1c: Error Level: Fatal
Do anybody have any SCSI path inside the SS 2 machine ?
Whereall i should put the terminators ? I already tried
third disk with and without terminators.
What the error message means?
Is SS-2 capable of supporting three harddisks?
Please reply to me directly by email.I am not on the list,
but will send the SUMMERY.
Thanks for any and all help.
Vinay Kumar Gupta
vinay@parcom.ernet.in
***************************************************************
Expertise is gained by investigating why a system doesn't work.
***************************************************************
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:10:20 CDT