First I would like to thank the following:
Ragnar Lonn
Todd S. Antonson
These are the only two respones I received. They are different. I used
the first one since that was the one I received first. So far so good.
disk_type = "HP2490A" \
: ctlr = SCSI : fmt_time = 17 \
: trks_zone = 3146 : asect = 0 : atrks = 198 \
: ncyl = 2159 : acyl = 2 : pcyl = 2582 : nhead = 18 : nsect = 107 \
: rpm = 6400 : bpt = 55296
partition = "HP2490_C" \
: disk = "HP2490A" : ctlr = SCSI \
: a = 0, 0 : b = 0, 0 : c = 0, 4158234 \
: g = 0, 0 : h = 0, 0
It's one of our user disks and we only have one big partition on it.
---------------------------------------------------------------
disk_type = "HP C2490 2gig" \
: ctlr = SCSI \
: ncyl = 2657 : acyl = 2 : pcyl = 2659 : nhead = 18 : nsect = 87 \
: rpm = 6400 : bpt = 44544
partition = "HP C2490 2gig" \
: disk = "HP C2490 2gig" : ctlr = SCSI \
: a = 0, 17226 : b = 11, 128412 : c = 0, 4160862 : g = 93, 4015224 \
: d = 0, 2079648 : e = 1328, 2081214
This is a zoned drive so most of these parameters are fudged
but format and newfs worked just fine.
-- Charles A. Uretzky Dept. NQ NQ38000P0 AT&T Commvault, Eatontown, N.J. abars!cau or cau@abars.att.com
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:10:17 CDT