Summary of "Trouble with rlogin..."
Original Error Messages:
rlogin
Out of ptys
telnet
All network ports in use
SOLUTION:
Solution was to create more ptys in /dev I beleive all who replied pointed to
this...it turned out that the system was configured for 256 ptys but only the
standard 48 had been created. I used the small 4 line script at the end to
add the additional ptys. Until recently this has been purely a server...
probably why it had not shown up earlier.
My system's NPTY was set to 256 in /usr/sys/sun4m/<kernal_name>/pty.h
My system's /usr/sys/sun4m/conf/<kernal_name>
pseudo-device pty256 # pseudo-tty's, also needed for SunView
Thanks to all who pitched in!
Kevin.Sheehan@uniq.com.au (Kevin Sheehan {Consulting Poster Child})
Dave Curado <Dave.Curado@hk.super.net>
Richard J. Niziak <rickn@ma.copley.com>
meg@hercules.cb.att.com (Mark E Grannen)
Chris Terry/Computervision <Chris_Terry/Computervision@ausns1.cv.com>
pamela@jupiter.legato.com (Pamela Pledger)
*******************************************************************************
Reconfigure your kernel and raise the maxusers variable or in the
/usr/sys/sun4x/'kernel name`/pty.h file, up the NPTY variable..
You do not have enough pty devices in /dev. These devices are in the
range /dev/tty[p-s][0-9a-f]. Use the /dev/MAKEDEV script to add more
*******************************************************************************
you need to increase the number of ptys (pseudo-ttys) on your system.
to do this, change your kernel config file to specify the number of
ptys you need (default is 48; 'ls -l /dev/pty* | wc -l' will show how
many you currently have). in the kernel config file, change the line:
pseudo-device pty # pseudo-tty's, also needed for SunView
to specify the number of ptys (128 in this example):
pseudo-device pty128 # pseudo-tty's, also needed for SunView
once you've make your change to the conf file, remake your kernel, install
it, and reboot.
you'll also need to make additional pty devices in /dev in order for the
new ptys to be used. this can be done before or after the kernel is remade
and the machine is rebooted. use /dev/MAKEDEV for this (make 80 more ptys
in this example):
# ls -l /dev/pty* | wc -l
48
# for i in 3 4 5 6 7
>do
>/dev/MAKEDEV pty$i
>done
# ls -l /dev/pty* | wc -l
128
#
*******************************************************************************
the MAKEDEV script in /dev will allow you to increase the number of pty's on
the system beyond the standard 48.
use the Syntax ./MAKEDEV ptyX (where X is a number from 4 to 15 - use
sequentially !)
*******************************************************************************
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:10:15 CDT