ORIGINAL QUESTION:
------------------
>We are in the process of upgrading the backup device on our Sparc 10 server from
>an Exabyte 8500 device to an Exabyte 8505. We are running SunOS 4.1.3. Can
>anyone advise me on the proper arguments for the dump command line for:
>
> d (bpi)
> s (size, both with 112m and 160m tapes)
> b (blocking factor)
>
>The vendor's documentation does not contain this information.
The only consensus was for a blocking factor of 126. Recommendations for
density ranged from 28633 to 108000 or let it default. Recommendations for size
range from 23000 to 165000.
One reply stated that I should get some real backup software like Legato. That
is probably what I should do but this years' budget won't allow that.
I will use Andataco's recommendations for now and see how things work.
Thanks, everyone, for your help!
SUMMARY OF REPLIES:
-------------------
>From vendor (Andataco, kenf@andataco.com):
> d 108000
> s 68000 (112m) or 97000 (160m)
> b 126
>
>Also remember that alot of the dump command parameters are somewhat arbitrary
>for instance the length, so you must always be responsible(at least under 4.1.x)
>for EOM(End of Media).
>From Ted Beatie <tcb@cipr-diva.mgh.harvard.edu>:
> d (bpi) 28633
> s (size, both with 112m and 160m tapes) 23000
> b (blocking factor) 126
>From Veselin Terzic <terzic@deneb.mda.ca>:
>d=54000
>s=26000
>b=126
>From dave@solar.exar.COM (dave):
>As far as what dump arguments to use, I use 126 as a block size and 165000 for
>the tape size (for 112m and 160m. I let dump worry about hitting the end of
>the tape ) , and the default for the density.
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:10:14 CDT